Contractor Mileage Cost Calculator
Free mileage cost calculator for contractors. Calculate true per-mile cost including gas, maintenance, insurance, depreciation. Charge accurate trip fees.
Charging $50 for a 30-mile trip is leaving money on the table if your real per-mile cost is $1.20. This calculator shows what your truck or van actually costs to operate per mile. Use it to set trip fees and bid travel-heavy jobs accurately.
How it works
Enter these numbers and the results update as you type:
- Price per Gallon ($)
- Vehicle MPG (mpg)
- Annual Miles Driven (miles)
- Annual Maintenance ($): Oil changes, tires, brakes, repairs.
- Annual Insurance ($)
- Annual Depreciation ($): Roughly: vehicle price / 6-8 years.
Example
With price per gallon $3.85, vehicle mpg 18 mpg, annual miles driven 25,000 miles, annual maintenance $1,500, annual insurance $1,800, annual depreciation $4,500:
- True Cost Per Mile: $0.53
- Fuel Component: $0.21
- Maintenance + Insurance + Depreciation: $0.31
- 30-Mile Round Trip: $15.78
- 60-Mile Round Trip: $31.55
What the numbers mean
Most contractors only think about gas when calculating trip cost. Real per-mile cost is 2-3x the fuel cost alone.
IRS standard mileage rate for 2026: roughly $0.67-0.70/mile. This is what they let you deduct, not what your truck actually costs. Real costs run $0.85-1.50/mile for most contractor vehicles.
What goes into per-mile cost:
1. **Fuel** — gallons used x price per gallon. About 25-40% of total cost. 2. **Maintenance** — oil changes ($50 every 5K miles), tire rotation, brake pads, repairs. About 15-25%. 3. **Insurance** — commercial auto coverage. About 15-20%. 4. **Depreciation** — vehicle loses value with miles. About 25-35%. 5. **Tires** — buried in maintenance, but roughly $0.05-0.10/mile on its own.
What NOT to include:
- Fixed costs that exist regardless of mileage (registration, toll passes)
- Salary if you self-drive (covered separately as your hourly rate)
How to charge clients for travel:
1. **Free travel within radius** — typical for jobs over $5K within 20 miles 2. **Trip fee** — flat fee for jobs outside radius ($50-150 typical) 3. **Per-mile billing** — for site visits and consultations beyond standard radius (use this calculator output + 50-100% markup for "your time") 4. **Mileage built into bid** — for distant projects, add travel cost to overhead allocation
If your truck costs $1.10/mile and a job is 60 miles round trip, that is $66 in vehicle cost alone. A free trip on a $2,000 job is eating 3.3% of margin before any other costs.
FAQ
What is the IRS mileage rate vs my actual cost?
IRS rate (~$0.67-0.70/mile in 2026) is what they allow as a tax deduction. Your actual cost depends on your vehicle, MPG, insurance, and depreciation. Most contractor trucks run $0.85-1.50/mile.
Should I charge clients per mile?
For jobs under $5K and within 20 miles, free travel is standard. Beyond that, a flat trip fee or per-mile charge is reasonable. Always disclose the policy upfront.
What MPG should I use?
Real-world MPG, not the EPA rating. Loaded contractor trucks get 30-50% less MPG than empty cars. A Ford F-150 EPA-rated 19 mpg might actually get 13 mpg loaded. Track your real MPG over a month.
How do I track depreciation?
Roughly: (vehicle purchase price - resale value at end of useful life) / years of useful life. A $50K truck driven 8 years and sold for $10K = $5K/year depreciation. Divide by annual miles for per-mile cost.
Does EZ-Estimates handle travel cost?
Yes. Set your per-mile rate once. EZ-Estimates auto-adds travel as a line item on jobs over your free-radius threshold.
Related
The live calculator runs in your browser. View all calculators | Back to EZ-Estimates